Our repair services
Metal Roof Repair After Storms, Wind, and Flying Debris
Metal roofs are built to last, but strong storms can still cause damage. High winds can loosen panels, pull fasteners, bend flashing, or open seams. Hail, branches, and flying debris can dent panels or damage protective coatings. Once that happens, water can find its way into places it should not be.
Metal Building Company provides metal roof repair for storm and wind damage in Oakland and the Bay Area. We inspect the roof, identify the damaged areas, and make the repairs needed to help stop leaks and protect the structure underneath.
Call 510-635-0111 to schedule a metal roof damage inspection.
Common Storm Damage on Metal Roofs
Storm damage on a metal roof can be obvious, but not always. A bent panel or missing fastener may stand out from the ground. Open seams, cracked sealant, or small punctures can be much harder to spot.
We repair:
Loose metal roof panels
Lifted or separated seams
Missing or backed-out fasteners
Damaged screws and washers
Bent, dented, or punctured panels
Damaged ridge caps
Leaks around vents, chimneys, and skylights
Loose or damaged flashing
Rusted or exposed areas
Storm damage from branches and debris
Failed sealant around penetrations
Water intrusion after heavy rain or wind
Metal roofs often fail at connection points first. Fasteners, seams, flashing, and penetrations are the areas most likely to let water in after heavy wind or impact damage.
Signs Your Metal Roof May Need Storm Damage Repair
After a storm, walk around your property and inspect the roof from the ground. Do not climb onto the roof unless you have the proper equipment and training. Metal roofing can be slippery, especially after rain.
You may need metal roof repair if you notice:
Loose or lifted metal panels
Bent trim or flashing
Missing screws or fasteners
Water stains on ceilings or walls
Leaks during or after heavy rain
Dents from hail or flying debris
Rust spots or exposed metal
Gaps at seams or roof edges
Damaged ridge caps
Pieces of metal trim on the ground
Moisture in the attic or insulation
Even a small opening in a metal roof can lead to bigger problems. Water can travel under panels, along framing, or into insulation before it becomes visible inside the building.
Metal Roof Leak Repair
A leak in a metal roof is not always directly above the water stain inside. Water can enter through a seam, fastener, flashing joint, or roof penetration, then travel before showing up indoors.
We inspect common leak points, including:
Panel seams
Exposed fasteners
Ridge caps
Pipe boots
Skylights
Chimney flashing
Wall transitions
Roof edges
Valleys
Gutters and drainage areas
Previous repair areas
Once we find the source of the leak, we repair the damaged section using methods appropriate for your metal roofing system.
Repair for Loose Panels, Fasteners, and Seams
High wind can put pressure on metal roof panels and the fasteners holding them in place. Over time, screws can back out, washers can dry out, and seams can separate. A strong storm can make those problems worse in one night.
Depending on the condition of your roof, we may:
Re-secure loose panels
Replace missing or damaged fasteners
Replace worn washers
Repair open seams
Seal exposed gaps
Repair or replace damaged flashing
Address punctures or impact damage
Replace damaged metal roof sections when needed
Our goal is to fix the actual source of the problem, not cover it up with a temporary patch that fails during the next storm.
Metal Roof Storm Damage Repair FAQ
Do you repair storm-damaged metal roofs on both homes and commercial buildings?
Yes. Metal Building Company repairs metal roofing systems on homes, shops, barns, garages, warehouses, and commercial buildings in Oakland and the Bay Area. Each metal roof is different, so we inspect the roof type, panel condition, fastener system, slope, drainage, and visible storm damage before recommending the right repair.
What types of storm damage do you repair on metal roofs?
We repair many common metal roof issues caused by storms and high winds, including exposed-fastener roof leaks, standing seam damage, flashing failures, storm-related punctures, wind-lifted panels, loose seams, and damaged roof sections.
What should I do if my metal roof is actively leaking?
If your metal roof is actively leaking or has visible storm damage, call Metal Building Company at 510-635-0111. Waiting can allow water to spread into insulation, decking, framing, drywall, and electrical areas.
Do you offer emergency metal roof repair?
Yes. Emergency metal roof repair may include securing loose panels, stopping active leaks, covering exposed openings, or making temporary repairs until a permanent repair can be completed.
Does storm damage mean I need a full metal roof replacement?
Not always. If the damage is limited to a few panels, fasteners, seams, or flashing areas, metal roof repair may be the right choice. Replacement may be worth discussing if the roof has widespread corrosion, repeated leaks, major panel damage, structural issues, or storm damage across a large section of the roof.
How do I know whether repair or replacement is the better option?
After the inspection, Metal Building Company will explain what we found and give you practical repair options. The recommendation depends on the extent of the storm damage, the condition of the existing metal roof, and whether a repair will properly solve the problem.
Schedule Metal Roof Repair in Oakland and the Bay Area.
Storm damage should be checked before the next heavy rain or wind event. A small leak, loose panel, or failed fastener can turn into a much more expensive repair if it is left alone.
Metal Building Company provides metal roof repair for storm and wind damage in Oakland and the Bay Area. We repair leaks, seams, fasteners, flashing, panels, and other storm-related metal roof problems.
Call 510-635-0111 today to schedule metal roof repair in Oakland and the Bay Area.
